Price: $22.99 - $14.99
(as of Jan 04, 2025 18:20:35 UTC – Details)
Product Description
Whether you are hanging pictures, putting up a new set of shelves or getting ready to start an addition, knowing where the studs are in a wall can be extremely handy! And A good stud finder can be the difference between a successful DIY home project and disaster. That is why a stud finder is important.
FOLAI stud finder uses UPGRADED SMART SENSORS which can sense the change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. You will not worry to drill many error holes on the wall while putting up a TV bracket, shelf unit, or even just a set of coat hooks on drywall.
The wall detector features large LCD display, ergonomic design, and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan, and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes
Stud Scan Detection
This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in the 0.5in. or 1 in. StudScan Mode first.
After you detect the center of an object, Please Use Metal Scan to determine if the reading in Stud scan mode was a wood stud, metal stud, or pipe.
Metal Scan Detection
FOLAI wall detector can locate metal studs in StudScan mode, DeepScan mode, and Metal Scan Modes. Since FOLAI stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.
Wire Warning Detection
Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detects and indicates the Live AC Wire.
Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.
Step 1: Calibrate the tool before every scan
Place the whole device against the wall, then press and hold the calibration button( on the side of the tool) to calibrate this tool. Wait for the reducing bars to disappear and beep to confirm calibration has been completed.
Step 2: Scan the wall
After finishing calibration, please release the calibration button. Then move the stud finder along the wall slowly, if you shake or lift the scanner accidentally, the device needs to be re-calibrated.
Step 3: Find the location of the stud
When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil.
Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of “Metal Scan Detection”)Then you can drill it to hang the thing.
The most accurate and safe – specially designed stud detector! Use state-of-the-art sensor technology to accurately and quickly locate metal pipes, live wires, studs, wood framing, rebar and support beams hidden behind walls, floors and ceilings, whether you’re a professional homeowner or a DIY enthusiast Find a great use for this electronic
Wall Scanner includes five different scanning modes for metal pipes, fire wires, studs, wood frames, rebar and brackets as well as ceilings, objects deeply embedded behind walls. Bolt mode detects wood beams and joists in drywall up to 1 5 inches Metal mode detects pipes up to 3 inches deep Mode detects wood and metal parts up to 3 inches while 85 to 240 Volts AC Current available for voltage and live wires up to 2 inches
Automatic calibration and ergonomic hold for comfortable use, please press and hold the scan button for 1-2 seconds before testing Automatic calibration provides the user with maximum reliability and accuracy The ergonomic design of this wall stud detector allows it to Fixed from any angle
LCD Screen Upgraded Design Shows Required Stud Material and Accurate Location of Studs – The digital stud scanner features a large LCD display and loud warning to detect the exact location of the object. The LCD screen beeps when material is found. Beeping tells you if you are close to the target. Quick detection saves users time and energy, making task completion easier
Stably secure brackets and decorations, in the commonly used stud detection mode, the stud scanner can help detect the center of wood behind the living room or bedroom wall. Freely switch between three depths to meet the detection basis of different wall thicknesses, assist in the hanging installation of TV brackets, photo frames, wall cabinets, mounting brackets, shelves, mirrors, bathroom handles, holiday birthday decorations, etc., and firmly fix the items in the center of the wall studs