Price: $32.99
(as of Jan 19, 2025 02:26:57 UTC – Details)
Product Description
Superior Performance 
Kuled stud finder is a necessary tool that quickly and easily locates the center of wood and metal studs and joists behind walls, floors, and ceilings etc.
Stud Scan
Stud scan mode：locates the center and edges of wood and metal studs up to 0.75 in.
Deep stud scan mode:Locates the center and edges of wood and metal studs up to 1.5 in
If the thickness of the surface is unknown,always start with stud scan mode first.
Metal Stud
Metal Stud Scan mode:Detects metal up to 2.36 inches.
When scanning for studs .choose Stud scan or deep scan mode on thicker walls to quickly locate the center of studs.Choose Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe etc.
AC Wire Scan
AC Wire Scan:AC warning detecting function works continuously in stud scan,Deep Stud scan,and Metal scan mode.when live AC voltage is detected, the AC warning indicator will appear.
take extra care under these circumstances or wherever live AC wiring exists.
This stud finder operates by slowly slide device horizontally across wall, right of left. A full bars arrow with CENTER words appears on the LCD and beep sounds after locating the center of the stud
HOW TO DETECT THE STUDS? 
Step 1
Calibrate After selecting the desired mode, place this tool flat against the wall, then press SCAN BUTTON to start calibration.
Tip: It is important to wait for the calibration to complete (2-3 seconds) every time before moving the scanner.
Step 2
Moving The decreasing bars will disappear and buzzer will beep, indicates the calibration is completed. Continue to keep the tool flat against the wall and begin scanning according to the arrow.
Step 3
Center Finding Continue sliding, a full bars arrow with CENTER words will display, and loudest beep sounds after locating the center of the stud. mark it with you pencil.
Then choose the Metal Scan mode to test whether it is a metal. After you confirm not a metal, it means that you found the center of a stud.
Stud finder：1.Stud scan mode： detect wood and metal stud up to 0.75inch(19mm) 2.Deep stud scan mode：detect wood and metal stud up to 1.5inch(38mm) 3.Metal scan model：Detect metal up to 2.36 inch(60mm) 4.AC wire scan model：Detect AC live wire up to 2 inch(51mm) 5.AC live wire warningMoisture Meter:1.Test wood moisture content from 6% to 60% 2.Text building material moisture content from 0.2%-2.9% 3.Test environment temperature 0℃ to 40℃(32°F to 104°F) 4.Hold-function to freeze the measurement. LCD backlit display. 5. LED visual and audible indication.Low battery indication.Automatic Power-Off
Stud finder 7 in 1
comparison
Four
Scanning Modes
Five
Auto Calibration
Metal Scan
AC Wire Scan
Sound Warning
Moisture Measure
Center finding
Difference
Edge finding
Four
Scanning Modes
Seven
Auto Calibration
Metal Scan
AC Wire Scan
Sound Warning
Moisture Measure
Center finding
Difference
Center finding
Stud Finder 3 in 1 
Stud finder 5 in 1 
▶Accurate and Quickly Location：Kuled stud finder wall scanner 7 in 1 will help you accurate and quickly locate edges and center of stud,metal nails,joists,live AC wire, tubes, steel bars behind all kinds of walls,floors and ceilings.Which will help you avoid hazards while installing TVs, cabinets ect. Whether you are DIY enthusiast or professional, stud detectors will be your good partners.
▶7 Scanning Modes：Wall sensor finder locates the center and edges of wood and metal studs up to 3/4 in. (19mm) deep. Deep Stud Scan model up to 1-1/2 in.(38mm) deep. Metal scan detects metal up to 2-2/5 in. (60mm) deep. AC scan detects live AC wires up to 2 in. (51mm) deep.moisture and temperature measurement model test the moisture content of wood（6%-60%）and Building materials（0.2%-2.9%），for temperature measurements，the display shows the present environment temperatrue from 0-40℃ or 32-104℉.
▶Digital LCD Display & Sound Warning ：The wood detector in wall has bright LCD display together with the sound warning to detect the accurate location of the objects. When find the target, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The beam finder make your work and life more easier.
▶Measure Moisture: Pin-Type Wood Moisture Meter Designed with 2 high precision pins, penetrate into the test surface and quickly know the moisture level in your walls.
▶What You Will Get:1 x Stud Finder, 1 x 9V Battery, 1 x User Manual; when you use the beam detector, if any further questions, please contact us without hesitation.