Price: $25.99
(as of Feb 14, 2025 04:45:15 UTC – Details)
Product Description
AUTEL ORIGINAL OBD2 SPLITTER 2-IN-1 ADAPTER CABLE FOR TESLA 3 / Y / S / X 
AUTEL ORIGINAL OBD2 ADAPTER CABLE FOR TESLA 3 / Y / S / X 
ENABLE YOU CONNECT AUTEL SCANNER TO PERFORM SYSTEM DIAGNOSTIC FOR TESLA S X Y 3 
WORK WITH AUTEL SCANNERS THAT SUPPORT TESLA DIAGNOSTIC. EASY CONNECTION 
IMPORTANT! Please make sure that vehicle power is turned off before disassembly. See the third picture for details.
Tesla Diagnostic Adapter Cable Connect Guide
CAN Port Coonection Guide:
1. Remove the end cap on the right side of the dashnoard
2. Pull aside the lower part of the body seal, and then remove the middle trim panel of the right A-pillar
3. Remove the upper fixing buckle of the lower A-pillar trim panel, and then remove the trim panel as a whole
4. Connect the adapter cable TCAN003 to CAN Port (blue connector). Connect the Autel scanner. Power the VCI, then start diagnosis.
X437 Port Coonection Guide:
For Vertical Central Control Screen
1. Locate the storage box under the central control screen. 2. Remove the storage box and locate the corresponding diagnostic connector
For Horizontal Central Control Screen
1. Locate the trim panel under the central control screen. 2. Remove the trim panel and locate the corresponding diagnostic connector
SEE MORE AUTEL OBD2 CABLES
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
5.0 out of 5 stars
6
5.0 out of 5 stars
6
—
5.0 out of 5 stars
2
Price
$25.99$25.99
$49.99$49.99
$19.99$19.99
$25.99$25.99
Compatible Vehicle
For Tesla 3 / Y / S / X
For Tesla 3 / Y
For Tesla S / X
For BMW F & G-Series
Compatible Devices
Specific Autel Scanners
Specific Autel Scanners
Specific Autel Scanners
Specific Autel Scanners
Connection Port
CAN Port & X437 Port
X930 (PIN 26) Port
X861 & X863 Port
16 Pin Port
Quality Backup
Autel
Autel
Autel
Autel
Total Length
About 11.02in
About 10.2in
–
About 12.2in
✅【2025 Autel Tesla Diagnostic Cable for Models Y / S / X / 3】Compatible for Tesla Model Y, S, X all year and Model 3 after 2021 (with Heat Pump), works together with Autel scanners that support Tesla diagnositic to diagnose your Tesla car. 📢🚩NOTE: Ensure that vehicle power is turned off before disassembly.
✅【2025 Autel New Tesla Diagnostic Cable: TCAN003】This Autel original Tesla OBD2 adapter TCAN003 is the upgraded ver. of Autel old version 12 Pin TCAN002 and 20 Pin TCAN001. This 2-in-1 ver. of TCAN003 directly cover Tesla Y / S / X vehicles all years, Tesla 3 after 2021 (with Heat Pump).You don’t need to purchase several adapters for specific model any more. ✅What’s more, the newest TCAN003 upgraded the ancient 15 pin port to 16 pin OBD2 port which can compatible with more Autel Scannners.
✅【Compatible with Tesla Y / S / X / 3】Different vehicle models connect different ports. This Autel Tesla diagnostic adapter can be connected to the Tesla X437 port (Below the central control screen) to diagnose Tesla S/ X all model year. It also can be connected to the Tesla CAN port (On the bottom of right front A-pillar) to diagnose Tesla Y all model year and Tesla 3 after 2021 (with Heat Pump).
✅【Work with Autel Scanners】Diagnostic software for Tesla Y / S / X / 3 models is available on following Autel scanners. You don’t need to purchase the software seperately. With this Autel Genuine Tesla diagnostic Adapter Cable, you can connect to Autel scanners that support Tesla diagnositic, such as: MaxiSys MS908S PRO, MS908S PRO II, MaxiCOM MK908 PRO II, Elite, Elite II, Elite II PRO, MS909, MS919, Ultra, Ultra Lite, MS909EV, Ultra EV.
💝【Reliable OBD2 Adapter Cable by Autel】 This Autel Tesla OBD2 cable comes with 1-year w*arranty, 30-day no r-e-ason r-e-turn and r-e-place.ment, and life-t-ime tech support. If you have any questions or issues, please don’t hesitate to rech us via ✍ autelchoice @ outlook . com ✍ for 24/7 assistance.